xcardiag's name

FG Tech Galletto 2-Master EOBD2 has been developed with high-speed USB2 technology, which makes it the fastest and most secure ECU chip tuning tool on the market. Moreover, easy operation and installation for this tool may be what you really appreciate.

Here, why I would like to share with you about FG Tech 2 V50? It, to a great extent, is owing to my real experience with the gadget. I ordered a FG Tech 2-Master EOBD2 from Xcardiag with only US$58.80, with which to do ECU chip tuning for my Peugeot 308 turbo 2011. After well connected, it did ECU chip programming efficiently. FG Tech 2 V50 works more stable when doing ECU programming with BDM function, while it is a must to change 3 chips with red circle into original HC14D before, shown as picture below ( there still has detailed BDM function guide)

Supplemented Features

1.Supported language: English, Italian, Dutch, French, Spanish, Portuguese, Czech and Turkish.

2.Except car vehicles, FG Tech also supports truck and motorbike for ECU programming.

3.Complete car list can be checked here

So, what described above is all my experience, I would be appreciated being given more information about FG Tech Galletto 2-Master EOBD2.

Silca SBB is a token needed key programmer for multi vehicle makes. Users should load the new token onto the device by inserting a smart card which contains the credits. There are usually has two occasions when transferring the credits.

Occasion 1 Credits have been successfully transferred.

If the credits have been successfully transferred, the SBB program will displays message as below.

“OPERATION SUCCESSFULLY COMPLETED!”

Occasion 2

Credits have not been successfully transferred.

If the credits have been successfully transferred, the program will pop out following error messages.

1) “SMART CARD COMMUNICATION ERROR.CHECK INSERTION POSITION”.

CAUSE: The smart do not insert properly or damaged.

SOLUTION: Make sure the smart card ahs been inserted properly.

2) “SMART CARD TPYE MISMATCH”

CAUSE: The smart do not insert properly

SOLUTION: Try to update the newest version and return to the card to Slica by press any key.

3) “SMART CARD ALREADY USED”

CAUSE: The smart card has been used or can not be re-used.

SOLUTION: Change another smart card.

4) “SMART CARD VERSION MISMATCH. FIREWARE UPDATE REQUIRED”

CAUSE: The card is not match with the SBB current version.

SOLUTION: Try to update the newest version available and return to the card to Slica by press any key.

5) “SMART CARD WRONG TOKEN NUMBER”

CAUSE: The card is damage.

SULUTION: Return to the Silca and change a smart card.

Free download

sbb-instruction-manual.pdf

SBB vehicle-model.pdf

SBB-new-function-detail-1.pdf

If you still puzzle how to pick up a proper key programmer for your Ford, xcardiag here list some beautiful suggestions.

1 Ford key programmer (USD209.99)

Ford key programmer is a professional and high performance key programmer for any Ford vehicles from 1997 to 2011. It works through PC and OBD2 connector. It supports clear keys and add new keys.

Ford model list:

Transit Connect (2007-2011)
Focus (2004-2011) non-prox
Fusion (2002-2011)
C-Max (2003-2010)
Cougar (1998-2002)
Fiesta (1998-2002)
Fiesta (2002-2008)
Focus (1998-2004)
KA (1998-2000)
KA (2000-2008)
Mondeo (1998-2007)
Puma (1997-2001)
Transit (2000-2006)
Transit Connect (2002-2007)

2 FNR Key Prog 4-in-1 Key Prog (USD84.99)

FNR Key Prog 4-in-1 key programmer is specialized for Nissan, Ford and Renualt vehicle makes. The newest software for Ford is V1.1.2 and the Ford incode calculator is V1.0. It supports English only. It is PC based key maker supporting communicating with OBD2 connector. It is quite use friendly and able to program up to 4 blank keys.

Vehicles Coverage:

Clio II
Laguna Ph1/Ph2
Espace Ph1/Ph2
Velsatis II Ph1/Ph2
MeganeII
ScenicII (<2007)
Kangoo Ph2
Kubistar
Master Ph1/Ph2
Movano
Interatar
TraficII
Vivaro
Primastar
MeganeII

3 IKEYCUTTER Condor XC-007 Fixture (USD170)

IKEYCUTTER Condor XC-007 is compatible with Ford X3 Fixture which can be used to cut Ford TIBBE Key Blade.

4 KP819 KP-819 Auto Key Programmer (USD254.8)

KP819 auto key programmer supports key matching for Mazda, Ford, Chrysler, Land Rover and Jaguar without password.

Support Ford models:

Ford Mondeo smart key.

Ford Mondeo remote key .

Focus type 1

Focus type 2

FORD FIESTA

5 AK60 FOCUS MAZDA Keymaker key programmer (USD83.88)

AK60 Focus keymaker is a key clone machine designed for Ford Focus vehicles from 20013 and RX8 of Mazda. It can be use alone without PC and PINCODE. It supports making Ford’s keys via BDM of dash It is quite easy to operate. Remove the immobilizer from car, use connection cable the device to car’s BDM port, start the device, insert TP01 or 60 chips, choose M2 button, when LED shinning one time, hear on beep means match success and the start the vehicle.

Vehicle Coverage:

Ford Focus from 2013

Ford VCM II diagnostic tool, the updated version of Ford VCM IDS, is the brand new diagnostics interface from Ford for use with the Integrated Diagnostics Software (IDS). It is a superior quality Ford VCM multi-language supporting diagnostic tool that is suitable for diagnosing and correcting technical glitches on Ford models.

 

I bought Ford VCM II V86 a month ago and now I would like to share my experience with it. Ford VCM II was purchased from Xcardiag for US$229.00, and I was really amazing about the high-speed delivery, which only took six days to arrive my door. I tested it on my 07 Ford Fusion, and it turned out to be working perfectly. And then, I still retrieved trouble codes for other Ford cars, such as 03 Ford Transit. Ford VCM could handle these tasks easily and efficiently.

During a month, some of the features or advantages of Ford VCM II diagnostic tool has been perfectly shown to me. These advantages can be classified below.

1. 2014 newest Ford VCM II diagnostic tool with wireless connection provides great convenience for diagnosing.

1. It supports multi-language: English, Italian, Spanish, Spanish (Mexico), French, French (Canada), German, Dutch, Finnish, Danish, Greek, Slovenian, Vietnamese, Turkish, Thai, Swedish, Russian, Portuguese, Portuguese (Brazil), Polish, Norwegian, Korean, Japanese, Indian, Czech and Chinese. Maybe you are the first time to see a tool equipped with so many kinds of languages, which almost eliminates the language limit.

1. The CFR replaces the Vehicle Data Recorder, which is an optional cable that allows the VCM II to monitor and record live data streams.

These listed above are what I count as importance, for which brings great convenience for usage. Additionally, Ford VCM II diagnostic tool still equips with other functions, including automatic vehicle recognition, programming and installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps etc.) and key programming and so on.

I would be appreciated if you can share me with more information about the other functions of Ford VCM II diagnostic tool.

ADS1801 VW Scan Tool is a newly released smart diagnostic scanner for VW family. It is able to work on all Volkswagen, Audi, Seat and Skoda sold worldwide since 1990. It supports android and windows system. ADS1801 software supports lifelong free update online. Either Bluetooth or USB are allowed to connect with the unit.

How to install the ADS1801 VW scanner software?

The software installation includes two sections: software download & program installation.

Ⅰ.Software Download

Two ways to download software:

A. Download software on the internet. Official website: http://english.adsscan.com. Click the “Upgrade” interface and download the software

B. Put CD into the computer/laptop via CD-ROM, open the CD and copy “APK” file into mobile phone memory card

Ⅱ.Program Installation

Steps 1: Find out “My Files” program after copying “APK” file into mobile phone memory card

Steps 2: Launch “My Files” program, the click ALL Files- sdcard0- ADS1801 VW Scan Tool , and find out “ADS1801 VW Scan Tool…Software. apk”;  (PIC 456)

Steps 3: Click the “ADS1801 VW…Software. apk” and the screen will display the interface automatically. Click “Install”(ADS 78).

The ADS1801 scan tool is installing.

Steps 4: The screen will display “Application installed” message after the installation completed.

Steps 5:

Then the “ADS1801 VW Scan Tool” software icon will display on the application program interface